the best micrometer brands
Accusize Industrial Tools.
a competitive Canadian distributor of measuring instruments (Bore Gages, Calipers & Attachments, Gage Blocks, and Pin Gages, Height Gages, Indicators and Holders, Micrometers & Attachments, Precision Levels), machine tool accessories and industrial cutting tool, accurate source the industrial quality products from the leading manufacturers in the USA, Canada, China, and Germany, etc.
This is some of the products of this brand on Amazon:
Accusize Industrial Tools 0-1'' X 0.0001'' Disc Type Micrometer in Fitted Box, 2502-1001
|
- Resolution: 0.0001''
- Measuring face: 20 mm
- Ratchet thimble for consistent reading
- Quick and easy zero adjustment on sleeve
- Nice fitted case
|
|
Accusize Industrial Tools 0-3 inch by 0.0001'' Ultra-Precision Outside Micrometers Carbide Tipped 3 Pc Set, Eg00-0903
|
- Includes 3 Micrometers with measuring ranges: 0 - 1", 1 - 2", 2 - 3", Vernier Graduations: 0.0001", accurate to 0.0001". Mitutoyo-style frame - solid casting frame.
- Lock nut
- Powder coated baked finish
- Packed in fitted case, completed with calibration standards and wrenches
|
|
Accusize Industrial Tools 0-6 inch by 0.0001'' Ultra-Precision Outside Micrometers with Carbide Tips 6 Pc Set, Eg00-0906
|
- 6 pc Ultra-Precision M-Type Outside Micrometer Set;
- Includes 6 micrometers with Measuring Ranges: 0 - 1'', 1 - 2'', 2 - 3'', 3 - 4'', 4 - 5'', and 5 - 6'', Vernier Graduations: 0.0001'', accurate to 0.0001''. Mitutoyo style frame - solid casting frame.
- Resolution: 0.0001"(inch); 0.01mm(metric)
| |
Accusize Industrial Tools 1-2''/25-50 mm by 0.00005''/0.001 mm 7-Key Electronic Digital Micrometer, Water Proof, Ac21-2022
|
- Measuring Range: 25-50 mm/1-2''
- Auto On and Off capabilities
- Resolution: 0.001 mm or 0.00005 inches
- Absolute, floating zero, and relative measurements (you can zero out at any point)
- Location Memory (no need to re-zero with each use!)
| |
Accusize Industrial Tools 2-24'' by 0.001'' Resolution Inside Micrometer Set, 3011-5051
|
- The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting.
- Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61"
- Accuracy: Metric(3+n+L/50)μm.
| |
Accusize Industrial Tools 0-1'' x 0.0001'' Multi Anvil Micrometer in Fitted Box, P101-S100
|
- Graduation: 0.0001''
- Two interchangeable anvils - Flat & Round precision ground and hardened
- Nice Fitted Case
- Measuring Range: 0-1'' X 0.0001''
| |
Starrett
Starrett T230XRL
Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 0-1" Range,
0.0001" Graduation, +/-0.00005" Accuracy
|
- Vernier scale in
inch units for taking precise outside diameter (OD) measurements
- Friction thimble
mechanism helps provide uniform pressure for precise, repeatable measurement
- Satin chrome finish
helps resist rust and reduce glare
- High-grade tool
steel construction for durability
|
|
Starrett 3202-6 Dial
Caliper, Hardened Stainless Steel, 0-6" Range, 0.001" Graduation,
White
|
- Provides quick,
accurate measurement of O.D, I.D and depth
- Lock screws for
sliding jaw and dial bezel
- Thumb-operated fine
adjustment roll
|
|
Starrett 436.1XRL-3
Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 2-3" Range,
0.001" Graduation, +/-0.0001" Accuracy
|
- Tapered frame for
measuring narrow slots and tight spaces
- Vernier scale in
inch units for taking precise outside diameter (OD) measurements
- Ratchet-stop
mechanism helps provide uniform pressure for precise, repeatable measurements
|
|
Starrett T216XRL-1
Digital Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces, 0-1"
Range, 0.0001" Graduation, +/-0.00005" Accuracy
|
- Tapered frame for
measuring narrow slots and tight spaces
- Mechanical digit
counter for ease of reading to 0.001”
- Ratchet-stop
mechanism helps provide uniform pressure for precise, repeatable measurements
|
|
Anytime Tools
Anytime Tools is an American company located in Los Angeles, California. providing industrial tools and supplies to professionals since 1999. such as Bore Gauges, Calipers, Indicators, Micrometers.
Anytime Tools 1" Digital Outside Micrometer Digit Counter Carbide Tips 0.0001"
|
- Range: 0-1"
- Accuracy: 0.0001"
- Digit Counter 0.001" each.
- Carbide anvils
- Locking nut
- Includes adjusting wrench & padded case
- Meets or exceeds federal specs
| |
Anytime Tools Disc Brake Rotor Caliper Digital Electronic Gauge Gage Micrometer 0-2.5"/0.0005"
|
- Range: 0-2.5"
- 3.5" jaw depth for larger rotors
- Reads in INCH / METRIC / FRACTIONS
- Resolution: .0005" / .01mm / fractions 1/64"
- Direct inch/metric/fraction conversion
| |
Anytime Tools Dial Caliper/Micrometer/Stainless Steel Ruler Professional Machinist Inspection Tool Set
|
- Dial Caliper: Measure 0-6" @ 0.001 Graduations Shock Proof Stainless Steel Hardened
- Micrometer: Measures 0-1" @ 0.0001 Graduations Carbide Tipped Anvil
- Ruler: Measures 0-6" Stainless Steel Hardened
| |
Anytime Tools Micrometer Multi Anvil Uni-Mike Universal 0-1" / 0.0001" Ratchet Thimble
|
- Carbide tipped spindle face
- Ratchet Thimble
- Range: 0-1" Accuracy: 0.0001"
- Includes 2 interchangeable anvils: Round Rod and Flat
- Satin Chrome Finish. Supplied in a fitted case.
| |
| |
|
BAOSHISHAN
BAOSHISHAN Digital Thickness Gauge 0-10mm | 0-25/64in Electronic Micrometer Thickness Meter Metric/inch Paper/Film/Fabric/Tape Thickness Gauge
|
- Measuring Range: 0-10mm; 0-25/64in
- Resolution: 0.01mm/0.0005in
- LCD Display Screen: It can read clearly in dark places
- Operation: easy to use, one-handed measurement
| |
BAOSHISHAN 0-300mm/12 Inch Digital Caliper Vernier Caliper Stainless Steel with Long Jaw 150mm/6 Inch Measuring Tool Accuracy:0.01mm Unit mm/in
|
- 0-300mm/11.8 inch (long jaw 150mm/6 inch) Battery not included
- ABS/0---Relative and Absolute Measurement Conversion Key
- mm/in---Metric Conversion Key
- TOL--tolerance
- HOLD--Lock the currently displayed number
| |
No comments:
Post a Comment